AutoclaveEngineers增压泵
【已经过期】：请登录重发或删除过期商品

详细信息

Autoclave Engineers AHL33-2D 型高流量气动高压液体增压泵
双作用双活塞空气驱动

Autoclave Engineers Series AHL33-2D Air-Operated, High-Flow/High-Pressure Hydraulic Pump

Autoclave Engineers AHL33-2D series pump is designed for customers that have a need for high pressure but want high flow(fill) rates all in one pump.  This pump can generate a fill rate of almost 8 GPM while maxing out at over 6,700 psi (462 bar) utilizing a low pressure air input of 20-110 psi (1.4 – 7.6 bar). Being air driven, the pump is explosion proof and safe for use in hazardous areas.  Pumps are used for pumping oil, water or oil/water mixtures.  However, all AE pumps are designed standard with stainless steel wetted parts, and along with special seals makes them ideal for many chemical applications.

双作用双活塞空气驱动 技术参数(液体方面性能参数)

 介质:油，水或水/油混合物以及其他兼容的流体介质
 最大出口压力:6700Psi(462bar)
 增压比:1:67
 隔离室（防止空气部分被污染）：标准
 排量/循环: 15.3 in3(250.7 cm3)
 双入口连接: 1" FNPT
 双出口连接: 1/2" FNPT

AHL33-2D Series Pump:Air-Operated, High-Flow / High-Pressure Hydraulic Pump
Features:
High Flow, Air Operated Liquid High Pressure Pump
Double-Acting, 10” Dual Piston Air Drive Delivers Smooth Output
Air to Pressure Ratio:  1:67
Air Drive Pressure Range:  20-110 psi (1.4-7.6 bar)
Volume Displacement per Stroke:  7.8 in3 (127.8 cm3)
Stainless Steel isolation (distance) chamber to protect air-drive section from main seal failure is standard
Maximum Outlet Pressure:  6,700 psi (462 bar)
Nominal air pressure required for maximum output pressure is 100 psi (6.9 bar)
Stainless Steel wetted parts suitable for oil or water applications

技术参数(气体方面性能参数)

 驱动空气压力范围: 20-110 psi (1.4-7.6 bar)
 活塞:440不锈钢
 额定工作压力:6700PSI(462bar)
驱动空气压力:100psi(6.9bar)
 入口: 1" female FNPT
 测试口: 1/8" female FNPT
 排气口(移去消声器): 1" female BSP
出厂时涂有密封润滑油
耗气量:50psi 气源压力, 零流体压力时,290SCFM